GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Why not fix one ton scrub radius with wheel offset?
Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? [message #361940 is a reply to message #361935] Fri, 22 January 2021 21:17 Go to previous messageGo to previous message
Zandr Milewski is currently offline  Zandr Milewski   United States
Messages: 12
Registered: September 2020
Karma:
Junior Member
Not you, I'm trying to figure out what John Lebetski meant, since the
difference between the Dave Point and the center of the patch (in track)
is that actual definition of scrub radius.

On 1/22/21 16:54, Joe Weir via Gmclist wrote:
> Yes, My bad. The point was that while not completely fixing the issue, it certainly moves it closer to correct.
>
> Zandr Milewski wrote on Fri, 22 January 2021 16:15
>> On 1/22/21 06:55, John R. Lebetski via Gmclist wrote:
>>> Also moving tire inboard may be able to fix the steering axis or some of the error, but not sure that totally fixes scrub radius.
>> Scrub radius is literally defined as the distance between the center of
>> the contact patch and the point where the steering axis touches the ground.
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Parts
Next Topic: Looking for advice
Goto Forum:
  


Current Time: Sun Oct 06 01:46:27 CDT 2024

Total time taken to generate the page: 0.00854 seconds