GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Why not fix one ton scrub radius with wheel offset?
Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? [message #361935 is a reply to message #361929] Fri, 22 January 2021 18:54 Go to previous messageGo to previous message
Joe Weir is currently offline  Joe Weir   
Messages: 769
Registered: February 2013
Location: Columbia, SC
Karma:
Senior Member
Yes, My bad. The point was that while not completely fixing the issue, it certainly moves it closer to correct.

Zandr Milewski wrote on Fri, 22 January 2021 16:15
On 1/22/21 06:55, John R. Lebetski via Gmclist wrote:
> Also moving tire inboard may be able to fix the steering axis or some of the error, but not sure that totally fixes scrub radius.

Scrub radius is literally defined as the distance between the center of
the contact patch and the point where the steering axis touches the ground.


_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



76 Birchaven - "Wicked Mistress" - New engine, trans, alum radiator, brakes, Sully airbags, fuel lines, seats, adult beverage center... those Coachmen guys were really thinking about us second hand owners by including that beverage center... Columbia, SC.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Parts
Next Topic: Looking for advice
Goto Forum:
  


Current Time: Sun Oct 06 01:58:40 CDT 2024

Total time taken to generate the page: 0.18222 seconds