GMCforum: GMCnet » Why not fix one ton scrub radius with wheel offset?

Home » Public Forums » GMCnet » Why not fix one ton scrub radius with wheel offset?

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? [message #361930 is a reply to message #361922]

Fri, 22 January 2021 16:53

Zandr Milewski

Messages: 12
Registered: September 2020

Karma:

Junior Member

On 1/22/21 08:22, Joe Weir via Gmclist wrote
> This does not fix the issue of the non-parallel control arms, but, as Bob would say, I'm comfortable with that.
Control arms are rarely parallel. Is there a camber gain issue we're
worried about here? (Sorry, I'm missing context, but considering a one-ton)

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		Why not fix one ton scrub radius with wheel offset? By: Joe Weir on Thu, 21 January 2021 17:56
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: jimk on Thu, 21 January 2021 18:01
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: Joe Weir on Thu, 21 January 2021 21:55
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: jimk on Thu, 21 January 2021 22:30
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: Zandr Milewski on Fri, 22 January 2021 22:12
		Re: Why not fix one ton scrub radius with wheel offset? By: JohnL455 on Fri, 22 January 2021 08:45
		Re: Why not fix one ton scrub radius with wheel offset? By: RF_Burns on Fri, 22 January 2021 08:45
		Re: Why not fix one ton scrub radius with wheel offset? By: JohnL455 on Fri, 22 January 2021 08:55
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: James Hupy on Fri, 22 January 2021 09:37
		Re: Why not fix one ton scrub radius with wheel offset? By: Joe Weir on Fri, 22 January 2021 10:22
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: Zandr Milewski on Fri, 22 January 2021 16:53
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: Joe Weir on Fri, 22 January 2021 18:45
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: Zandr Milewski on Fri, 22 January 2021 16:15
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: Joe Weir on Fri, 22 January 2021 18:54
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: James Hupy on Fri, 22 January 2021 19:18
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: sgltrac on Fri, 22 January 2021 21:19
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: Zandr Milewski on Fri, 22 January 2021 22:05
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: Zandr Milewski on Fri, 22 January 2021 21:36
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: James Hupy on Fri, 22 January 2021 22:00
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: Matt Colie on Sat, 23 January 2021 09:50
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: James Hupy on Sat, 23 January 2021 11:01
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: Matt Colie on Sat, 23 January 2021 15:49
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: James Hupy on Sat, 23 January 2021 16:55
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: dsmithy on Sat, 23 January 2021 22:42
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: Zandr Milewski on Fri, 22 January 2021 21:17
		Re: Why not fix one ton scrub radius with wheel offset? By: RF_Burns on Fri, 22 January 2021 20:52
		Re: Why not fix one ton scrub radius with wheel offset? By: JohnL455 on Sat, 23 January 2021 08:58
		Re: Why not fix one ton scrub radius with wheel offset? By: jhbridges on Sun, 24 January 2021 08:18
		Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? By: Keith V on Sun, 24 January 2021 15:15

Previous Topic:	[GMCnet] Parts
Next Topic:	Looking for advice

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Oct 06 01:54:26 CDT 2024

Total time taken to generate the page: 0.01025 seconds