Re: Why not fix one ton scrub radius with wheel offset? [message #361922 is a reply to message #361917] |
Fri, 22 January 2021 10:22 |
Joe Weir
Messages: 769 Registered: February 2013 Location: Columbia, SC
Karma:
|
Senior Member |
|
|
The wheel I linked to is for a Suburban, so that makes sense. This is the only wheel I have found in an 8x6.5 bolt circle and 16" diameter.
Moving the wheel inboard 28mm moves the scrub radius closer to the correct point - not perfect. Seems like this would help correct the torque steer issue. Does anyone have a link to the actual scrub radius difference? I know I saw a drawing somewhere. The spacers that came with my one ton are 3.25". Maybe this issue has been addressed with the current spacers. Was trying to have a non-spacer solution.
This does not fix the issue of the non-parallel control arms, but, as Bob would say, I'm comfortable with that.
The centerbore of the Chevy 2500 wheels linked above is 5.15. Aluminum hub spacers are available.
76 Birchaven - "Wicked Mistress" - New engine, trans, alum radiator, brakes, Sully airbags, fuel lines, seats, adult beverage center... those Coachmen guys were really thinking about us second hand owners by including that beverage center...
Columbia, SC.
|
|
|