GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Why not fix one ton scrub radius with wheel offset?
Re: [GMCnet] Why not fix one ton scrub radius with wheel offset? [message #361908 is a reply to message #361905] Thu, 21 January 2021 18:01 Go to previous messageGo to previous message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma:
Senior Member
There is no space at the caliper against the wheel rim.

On Thu, Jan 21, 2021 at 3:56 PM Joe Weir via Gmclist <
gmclist@list.gmcnet.org> wrote:

> Like the title says. If the One Ton kit puts the center of the tire
> @1.5" too far outboard, why not reduce the width of the spacer, or use a
> wheel
> with 1.5" less offset?
>
> Or, did I not see that discussion?
>
> For example, if the wheels clear the calipers, This chevy wheel has 28mm
> of positive offset - just over an inch. Seems that would help.
>
>
> https://www.bbwheelsonline.com/oe-creations-pr156-wheels-rims-16x6-5-8x6-5-8x165-1-polished-28mm-156p-668128/
>
>
> https://www.bbwheelsonline.com/oe-creations-pr156-wheels-rims-16x6-5-8x6-5-8x165-1-polished-28mm-156p-668128/
> --
> 76 Birchaven - "Wicked Mistress" - New engine, trans, alum radiator,
> brakes, Sully airbags, fuel lines, seats, adult beverage center... those
> Coachmen
> guys were really thinking about us second hand owners by including that
> beverage center...
> Columbia, SC.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>


--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Parts
Next Topic: Looking for advice
Goto Forum:
  


Current Time: Sun Oct 06 02:07:26 CDT 2024

Total time taken to generate the page: 0.00588 seconds