GMCforum: GMCnet

Home » Public Forums » GMCnet » onan (onan efi)

Show: Today's Messages :: Polls :: Message Navigator

Re: onan [message #361669 is a reply to message #361666]

Mon, 11 January 2021 15:30

wally

Messages: 643
Registered: August 2004
Location: Omaha Nebraska

Karma:

Senior Member

mghamms wrote on Mon, 11 January 2021 14:50

Interesting but short video.

Any more information on the setup?

wally wrote on Mon, 11 January 2021 14:18
mghamms wrote on Mon, 11 January 2021 13:26
Anyone know of or have any idea about a EFI for the Onan generator?
We did efi on the GMC's Onan. Video of start and run here https://www.youtube.com/watch?v=woA-BxJeTIk https://www.youtube.com/watch?v=woA-BxJeTIk
Yamaha and GM bits mixed with Crane and Megasquirt electronics most of it previously used (battle proven) stuff.

I have 20 or so pages on our blog about the setup under Onan efi links. https://wallyandsue.blogspot.com/
Been messing with it for a few years and since we pretty much are stuck at home it got finished. Interesting fuel tune because it runs at 1,800 rpm or off. It's running fixed timing from a battle proven Ford VR crank sensor. I'm using the original carb as a air valve with the choke fixed open and throttle position sensor attached. The governor works exactly like before with the same linkage and valve.

Wally Anderson
Omaha NE
75 Glenbrook

Report message to a moderator

[Message index]

		onan By: mghamms on Mon, 11 January 2021 13:26
		Re: onan By: wally on Mon, 11 January 2021 14:18
		Re: onan By: mghamms on Mon, 11 January 2021 14:50
		Re: onan By: wally on Mon, 11 January 2021 15:30
		Re: onan By: mghamms on Mon, 11 January 2021 19:02
		Re: [GMCnet] onan By: James Hupy on Mon, 11 January 2021 19:15
		Re: [GMCnet] onan By: mghamms on Tue, 12 January 2021 18:30
		Re: onan By: Bill Van Vlack on Tue, 27 September 2022 14:34
		Re: [GMCnet] onan By: James Hupy on Mon, 11 January 2021 14:22
		Re: onan By: jhbridges on Thu, 14 January 2021 15:59
		Re: onan By: RF_Burns on Thu, 14 January 2021 20:30
		Re: [GMCnet] onan By: Ken Henderson on Fri, 15 January 2021 05:54
		Re: onan By: RF_Burns on Fri, 15 January 2021 08:05
		Re: onan By: wally on Fri, 15 January 2021 14:15
		Re: onan By: mghamms on Mon, 26 September 2022 19:30

Previous Topic:	[GMCnet] GMC A-Arm
Next Topic:	[GMCnet] net

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Jul 07 15:52:39 CDT 2024

Total time taken to generate the page: 0.00683 seconds