Re: [GMCnet] Ride height. [message #360527 is a reply to message #360507] |
Fri, 04 December 2020 21:02 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma:
|
Senior Member |
|
|
What bdub posted is the the GM offic1al way so set it. An easier way is to cut some 1x2 or 2x4 blocks cut to the correct distance to the bottom of the frame. I usually cut up some left over scraps and hand them out when we measure heights and weigh coaches at the rallies. The front and rear are different heights so I cut 2x4's for the rear and 1x2's for the fronts so I can easily tell them apart. Those block are at the airport and I do not remember the lengths. If I find them I will post them.
BTW, this is the way Jim K. does it. I got the idea from him.
If someone else has the numbers, Please post them. I will not be at the airport for several days.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|