GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Door Latch repair (Bottom latch jaw adjustment )
Re: [GMCnet] Door Latch repair [message #356540 is a reply to message #356537] Wed, 08 July 2020 13:30 Go to previous messageGo to previous message
Ken Henderson is currently offline  Ken Henderson   United States
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma:
Senior Member
Here's the Latch Tutorial location:
The Winter 2020 issue of *GMC Vintage RVing page 13*Ken H.

On Wed, Jul 8, 2020 at 1:54 PM Ken Henderson wrote:

> M.
>
> Back in Nov. '18, I posted this in response to someone's similar situation:
>
> Some years ago Bill Bramlett modified some latch pins by replacing the original
> pin+rubber+visible surround with a solid steel pin. When I
> finally got around to installing the one he gave me, it made a world of
> difference difference in the door's closing. IIRC, JimK has taken over
> and has them
> made for sale.
> Last year, I removed, disassembled, cleaned and re-lubricated the latch.
> I can now latch the door firmly with one finger.
> While you're fooling with the latch, adjust the barrel nut in the interior
> lock button's shaft to that location that prevents locking the door from
> the outside without the key --
>
> There were several other postings associated with that confirming the
> value of the solid striker -- and comments by JimK about the difficulty of
> getting cores to modify.
>
> As a follow up to that, Kim asked me to submit a writeup for the GMCMI
> magazine, which I did -- you can probably find that, with photo, at
> www.gmcmi.com
>
> Ken H.
>
>
> On Wed, Jul 8, 2020 at 9:30 AM mtb8114--- via Gmclist gmclist@list.gmcnet.org> wrote:
>
>> I finally got my door curved enough to shut with secondary latching. Now
>> it seems my lower latch jaw (LLJ) will lock initially but not secondary. The
>> upper works fine. I took it apart and the cam that locks it seem to be
>> working and the LLJ will lock as long as I put a little down pressure on the
>> horizontal bar. Seems either a spring is missing or is weak somewhere or
>> an adjustment is needed.
>>
>> Is there a presentation or write up on adjustments for these mechanisms?
>>
>> Also the lithium grease on it is old. What are y’all using to clean and
>> lube these things?
>>
>> Thanks
>> --
>> M Beam
>> 75’ Avion
>> TBI EBL , 3.70 LSD and other stuff
>> Zuki Sidekick,
>> Dozier Al
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org


Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Windshield Clinic in Corunna GMCMI Convention
Next Topic: GMC in the mud
Goto Forum:
  


Current Time: Wed Jul 03 00:29:13 CDT 2024

Total time taken to generate the page: 0.01107 seconds