GMCforum: GMCnet » Leak in air line

Home » Public Forums » GMCnet » Leak in air line

Show: Today's Messages :: Polls :: Message Navigator

Re: Leak in air line [message #334448 is a reply to message #334417]

Mon, 02 July 2018 15:31

Deb

Messages: 349
Registered: October 2016
Location: Logan Lake, BC

Karma:

Senior Member

Well the line is split at the fitting. Never removed or fiddled with these before. In a very small town with no hardware store. Is it possible to disassemble where the line enters the compression fitting, cut the line and temporarily reuse the same hardware till I can pick up a replacement fitting?

Or am I better just to inflate the bags to a good riding height and close the valves till I can repair it?

Deb McWade Logan Lake, BC, CAN GMC Alumnus It's Bigger on the Inside!

Report message to a moderator

[Message index]

		Leak in air line By: Deb on Sun, 01 July 2018 20:18
		Re: Leak in air line By: Ken Burton on Sun, 01 July 2018 20:23
		Re: Leak in air line By: JohnS on Sun, 01 July 2018 21:03
		Re: Leak in air line By: RF_Burns on Mon, 02 July 2018 06:41
		Re: Leak in air line By: jhbridges on Mon, 02 July 2018 07:53
		Re: Leak in air line By: Deb on Mon, 02 July 2018 15:31
		Re: Leak in air line By: jhbridges on Mon, 02 July 2018 15:36
		Re: Leak in air line By: Deb on Mon, 02 July 2018 15:54
		Re: Leak in air line By: jhbridges on Tue, 03 July 2018 07:15
		Re: Leak in air line By: Deb on Wed, 04 July 2018 08:01
		Re: Leak in air line By: Ken Burton on Wed, 04 July 2018 08:59
		Re: Leak in air line By: Deb on Wed, 04 July 2018 12:50
		Re: Leak in air line By: jhbridges on Wed, 04 July 2018 08:08
		Re: [GMCnet] Leak in air line By: USAussie on Wed, 04 July 2018 08:59
		Re: Leak in air line By: jhbridges on Wed, 04 July 2018 12:19

Previous Topic:	Electronic QuadraJet and factory Electronic Spark Control
Next Topic:	On the Road Electrical Trouble-shooting

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Jun 30 16:36:05 CDT 2024

Total time taken to generate the page: 0.05933 seconds