GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Electronic QuadraJet and factory Electronic Spark Control (CCC, ESC, E4ME, E4MC, E4MED, E4MEF)
Re: Electronic QuadraJet and factory Electronic Spark Control [message #334350 is a reply to message #333679] Sun, 01 July 2018 16:21 Go to previous messageGo to previous message
GMC2000   United States
Messages: 193
Registered: March 2018
Location: Georgia
Karma:
Senior Member
I prefer a return line but Im not sure the best way to do it on a Q-jet.

you can also do the safety kill by taping into the low oil pres sender or light itself without a special sender, run that to a relay then out of it onto the e.pump so it removes power when the light comes on. then use the ignition switch to starter solenoid for start up, some ignition switches even have a primer circuit built in just ahead of the regular starting position and also spring loaded and you can prime before going into the start position.



 
Read Message icon2.gif
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Posting photos on the net
Next Topic: Leak in air line
Goto Forum:
  


Current Time: Fri Jun 28 09:42:18 CDT 2024

Total time taken to generate the page: 0.06230 seconds