GMCforum: GMCnet » [GMCnet] Carb fuel pump preasure. Isn't it 6 PSI.

Home » Public Forums » GMCnet » [GMCnet] Carb fuel pump preasure. Isn't it 6 PSI.

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Carb fuel pump preasure. Isn't it 6 PSI. [message #333360 is a reply to message #331298]

Mon, 11 June 2018 15:41

GatsbysCruise

Messages: 261
Registered: January 2017
Location: Waukegan, Illinois

Karma:

Senior Member

SeanKidd wrote on Mon, 23 April 2018 20:00

My carter 4070 put out 6 psi, but it still lifted the needle on the float, I had to put on a regulator and knock it down to 4 psi.

Is this still true if you have a Mech fuel pump that has a bypass to return fuel to the tanks if it has too much???
I have an Electric fuel pump to prime the system if needed and a mech fuel pump with the bypass on the engine.....

GatsbysCruise. \ 74GMC260 Former Glacier Model style. \ Waukegan, Illinois \ Keep those MiniDiscs Spinning \ MY GREYHOUND IS FASTER THAN YOUR HONOR ROLL STUDENT \ WindowsXP-Win7-Win8.1-UBUNTU STUDIO - UBUNTU VOYAGER - Berzin Auto Center

Report message to a moderator

[Message index]

		[GMCnet] Carb fuel pump preasure. Isn't it 6 PSI. By: BobDunahugh on Sat, 21 April 2018 21:18
		Re: [GMCnet] Carb fuel pump preasure. Isn't it 6 PSI. By: powwerjon on Sun, 22 April 2018 08:03
		Re: [GMCnet] Carb fuel pump preasure. Isn't it 6 PSI. By: SeanKidd on Mon, 23 April 2018 20:00
		Re: [GMCnet] Carb fuel pump preasure. Isn't it 6 PSI. By: GatsbysCruise on Mon, 11 June 2018 15:41

Previous Topic:	[GMCnet] Emory's Kitchen Hood Vent Install
Next Topic:	[GMCnet] Free GMC in Baltimore area

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Jul 02 19:57:10 CDT 2024

Total time taken to generate the page: 0.01841 seconds