Re: Oil Pressure Sender [message #331124 is a reply to message #331079] |
Fri, 20 April 2018 07:49 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma:
|
Senior Member |
|
|
I would go with the 80 PSI sender. Here is my logic.
40 PSI which is where I would expect the gauge to run going down the highway would be 1/2 scale. 60 PSI which is where the relief valve would kick in cold would be 3/4 scale. If the relief valve in the pump were ever to stick driving the cold oil pressure higher than 60, you would see it using an 80 PSI sender. You would not see it using a 60 PSI sender.
I believe 80 PSI is OEM.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|