GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » NAPA SKF-21771 rear bearing seal fails the 0.25" test
Re: NAPA SKF-21771 rear bearing seal fails the 0.25" test [message #331123 is a reply to message #318141] Fri, 20 April 2018 07:44 Go to previous message
jhbridges is currently offline  jhbridges   United States
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma:
Senior Member
I bought four that fit last year. Two were SKF, the other two were CarQuest boxed. Both had the same number stamped in the metal... not the part number. The SKF ones had orange sealer painted on the outside, the CarQuest didn't. Obviously from the same source though.

--johnny


Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: An interesting point of view from Chuck Woodbury
Next Topic: WANTED : 2 good GMC Hubs for rear wheels
Goto Forum:
  


Current Time: Tue Jul 02 13:33:44 CDT 2024

Total time taken to generate the page: 0.00813 seconds