RF_Burns Messages: 2277 Registered: June 2008 Location: S. Ontario, Canada
Karma:
Senior Member
Richard,
The issue occurs when the seal housing is driven in flush with the hub housing. The trick is to leave the seal housing sitting slightly proud of the hub as shown in the diagram below:
Dave Lenzi makes a tool to install the seal to the proper depth.
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC. 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that