GMCforum: GMCnet » recommended 455 valve cover gasket

Home » Public Forums » GMCnet » recommended 455 valve cover gasket (and process)

Show: Today's Messages :: Polls :: Message Navigator

Sat, 10 March 2018 11:44

Chris Tyler

Messages: 458
Registered: September 2013
Location: Odessa FL

Karma:

Senior Member

What I have done for years is use a cheap cork gasket sprayed with 2 coats silver spray paint. This seals it and prvents it fronm absorbing oil.
Then glue it in plce with 3 m weatherstrip adhesive to the vlve cover and a coat of anti seize on the head side.
Never had one fail or leak yet, even when frequently removed to set the valves.

76 Glenbrook

Report message to a moderator

[Message index]

		recommended 455 valve cover gasket By: lqqkatjon on Thu, 08 March 2018 14:40
		Re: recommended 455 valve cover gasket By: Carl S. on Thu, 08 March 2018 20:46
		Re: recommended 455 valve cover gasket By: Dennis S on Thu, 08 March 2018 21:50
		Re: recommended 455 valve cover gasket By: Ken Burton on Fri, 09 March 2018 01:07
		Re: recommended 455 valve cover gasket By: rgogan on Sat, 10 March 2018 08:59
		Re: recommended 455 valve cover gasket By: Ken Burton on Sat, 10 March 2018 19:21
		Re: recommended 455 valve cover gasket By: Bullitthead on Sat, 10 March 2018 10:43
		Re: recommended 455 valve cover gasket By: Chris Tyler on Sat, 10 March 2018 11:44
		Re: [GMCnet] recommended 455 valve cover gasket By: James Hupy on Sat, 10 March 2018 13:07

Previous Topic:	Type II (75,76) HVAC changes.
Next Topic:	Any GMC from Florida going to Tucson

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Jul 03 06:38:29 CDT 2024

Total time taken to generate the page: 0.00644 seconds