GMCforum: GMCnet » question on Kelvin's wood ramps

Home » Public Forums » GMCnet » question on Kelvin's wood ramps

Show: Today's Messages :: Polls :: Message Navigator

Re: question on Kelvin's wood ramps [message #328777 is a reply to message #328766]

Fri, 02 February 2018 21:08

lqqkatjon

Messages: 2324
Registered: October 2010
Location: St. Cloud, MN

Karma:

Senior Member

Only thing i remember is to cut up the long pieces 1st. Then cut up the short pieces. When we built the last set we cut a few extra short pieces and shorted myself a longer board because a few of the shorter pieces were to have cone from off cuts of other boards.

Jon Roche 75 palm beach EBL EFI, manny headers, Micro Level, rebuilt most of coach now. St. Cloud, MN http://lqqkatjon.blogspot.com/

Report message to a moderator

[Message index]

		question on Kelvin's wood ramps By: Bob S. on Fri, 02 February 2018 13:10
		Re: question on Kelvin's wood ramps By: Harry on Fri, 02 February 2018 13:34
		Re: question on Kelvin's wood ramps By: Justin Brady on Fri, 02 February 2018 13:43
		Re: [GMCnet] question on Kelvin's wood ramps By: Rob on Fri, 02 February 2018 16:23
		Re: [GMCnet] question on Kelvin's wood ramps By: Bob S. on Fri, 02 February 2018 17:12
		Re: question on Kelvin's wood ramps By: RF_Burns on Fri, 02 February 2018 20:42
		Re: question on Kelvin's wood ramps By: lqqkatjon on Fri, 02 February 2018 21:08
		Re: question on Kelvin's wood ramps By: John Heslinga on Sat, 03 February 2018 00:32
		Re: [GMCnet] question on Kelvin's wood ramps By: Kingsley Coach on Sat, 03 February 2018 10:16
		Re: [GMCnet] question on Kelvin's wood ramps By: Vern Crawford on Sat, 03 February 2018 10:23
		Re: [GMCnet] question on Kelvin's wood ramps By: thesmith on Mon, 07 January 2019 12:13
		Re: [GMCnet] question on Kelvin's wood ramps By: Rob on Mon, 07 January 2019 12:39
		Re: [GMCnet] question on Kelvin's wood ramps By: 77Royale on Mon, 07 January 2019 12:52

Previous Topic:	[GMCnet] ripping out the shag.
Next Topic:	[GMCnet] Alternator fire prevention harness.

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Jul 03 05:17:17 CDT 2024

Total time taken to generate the page: 0.03204 seconds