GMCforum: GMCnet » question on Kelvin's wood ramps

Home » Public Forums » GMCnet » question on Kelvin's wood ramps

Show: Today's Messages :: Polls :: Message Navigator

Re: question on Kelvin's wood ramps [message #328775 is a reply to message #328766]

Fri, 02 February 2018 20:42

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

I made a set out of left over decking boards with 2x4 spacers. The deck boards are called 5/4" (five quarters) and about 6" wide. I used 2 boards wide so there is plenty of width. The height of the deck boards and the 2x4 spacers it works out to giving maximum height while sliding under the rocker panels.

If any one is interested in building a set from deck boards, I can post some pics.

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

		question on Kelvin's wood ramps By: Bob S. on Fri, 02 February 2018 13:10
		Re: question on Kelvin's wood ramps By: Harry on Fri, 02 February 2018 13:34
		Re: question on Kelvin's wood ramps By: Justin Brady on Fri, 02 February 2018 13:43
		Re: [GMCnet] question on Kelvin's wood ramps By: Rob on Fri, 02 February 2018 16:23
		Re: [GMCnet] question on Kelvin's wood ramps By: Bob S. on Fri, 02 February 2018 17:12
		Re: question on Kelvin's wood ramps By: RF_Burns on Fri, 02 February 2018 20:42
		Re: question on Kelvin's wood ramps By: lqqkatjon on Fri, 02 February 2018 21:08
		Re: question on Kelvin's wood ramps By: John Heslinga on Sat, 03 February 2018 00:32
		Re: [GMCnet] question on Kelvin's wood ramps By: Kingsley Coach on Sat, 03 February 2018 10:16
		Re: [GMCnet] question on Kelvin's wood ramps By: Vern Crawford on Sat, 03 February 2018 10:23
		Re: [GMCnet] question on Kelvin's wood ramps By: thesmith on Mon, 07 January 2019 12:13
		Re: [GMCnet] question on Kelvin's wood ramps By: Rob on Mon, 07 January 2019 12:39
		Re: [GMCnet] question on Kelvin's wood ramps By: 77Royale on Mon, 07 January 2019 12:52

Previous Topic:	[GMCnet] ripping out the shag.
Next Topic:	[GMCnet] Alternator fire prevention harness.

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Jul 03 04:36:43 CDT 2024

Total time taken to generate the page: 0.01776 seconds