GMCforum: GMCnet » [GMCnet] Removing Valve cover/ oil pan baffles

Home » Public Forums » GMCnet » [GMCnet] Removing Valve cover/ oil pan baffles

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Removing Valve cover/ oil pan baffles [message #328676 is a reply to message #328669]

Mon, 29 January 2018 08:02

Justin Brady

Messages: 769
Registered: April 2015
Location: Bell Buckle, TN

Karma:

Senior Member

I would just drill out the spot welds and then TIG it back together when you're ready, no spatter no problems at all.
Brazing would work as well if no TIG available.

Justin Brady http://www.thegmcrv.com/ 1976 Palm Beach 455

Report message to a moderator

[Message index]

		[GMCnet] Removing Valve cover/ oil pan baffles By: BobDunahugh on Fri, 26 January 2018 00:39
		Re: [GMCnet] Removing Valve cover/ oil pan baffles By: Bullitthead on Sat, 27 January 2018 09:59
		Re: [GMCnet] Removing Valve cover/ oil pan baffles By: tphipps on Sat, 27 January 2018 10:17
		Re: [GMCnet] Removing Valve cover/ oil pan baffles By: Kosier on Sat, 27 January 2018 10:22
		Re: [GMCnet] Removing Valve cover/ oil pan baffles By: GMCWiperMan on Sat, 27 January 2018 11:40
		Re: [GMCnet] Removing Valve cover/ oil pan baffles By: James Hupy on Sat, 27 January 2018 12:01
		Re: [GMCnet] Removing Valve cover/ oil pan baffles By: jimk on Sat, 27 January 2018 12:06
		Re: [GMCnet] Removing Valve cover/ oil pan baffles By: JohnL455 on Sat, 27 January 2018 19:53
		Re: [GMCnet] Removing Valve cover/ oil pan baffles By: Wackster on Sat, 27 January 2018 21:45
		Re: [GMCnet] Removing Valve cover/ oil pan baffles By: noi on Sun, 28 January 2018 14:45
		Re: [GMCnet] Removing Valve cover/ oil pan baffles By: BobDunahugh on Sun, 28 January 2018 23:39
		Re: [GMCnet] Removing Valve cover/ oil pan baffles By: Justin Brady on Mon, 29 January 2018 08:02
		Re: [GMCnet] Removing Valve cover/ oil pan baffles By: USAussie on Mon, 29 January 2018 18:59
		Re: [GMCnet] Removing Valve cover/ oil pan baffles By: Larry on Mon, 29 January 2018 21:00
		Re: [GMCnet] Removing Valve cover/ oil pan baffles By: k2gkk on Mon, 29 January 2018 21:32
		[GMCnet] Removing Valve cover/ oil pan baffles By: BobDunahugh on Mon, 29 January 2018 21:03
		Re: [GMCnet] Removing Valve cover/ oil pan baffles By: palerider on Tue, 30 January 2018 19:37

Previous Topic:	[GMCnet] Don't think the heater is at top performance.
Next Topic:	Transmodes and Toronado Transmissions For Sale, San Fran

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Jul 03 08:02:27 CDT 2024

Total time taken to generate the page: 0.00698 seconds