Re: [GMCnet] Removing Valve cover/ oil pan baffles [message #328646 is a reply to message #328645] |
Sat, 27 January 2018 12:01 |
James Hupy
Messages: 6806 Registered: May 2010
Karma:
|
Senior Member |
|
|
I concur with Ken Henderson. Most of the time, aftermarket valve covers do
not come with breathers or baffles, just holes that don't fit OEM grommets
very well.
As for the oil pan windage shields, the only way I have used is to
grind or drill out the spot welds, clean religiously, then either spot
weld or button weld them back in with a wire feeder. Don't leave them out.
The factory would not have put them there without good reason.
Jim Hupy
Salem, Or
78 GMC ROYALE 403
On Jan 27, 2018 9:41 AM, "Ken Henderson" wrote:
> I've never found aftermarket covers with baffles.
>
>
> Ken H.
>
> On Jan 27, 2018 10:59 AM, "Terry" wrote:
>
> ...If you are really going for the cleanest parts it would make sense to
> put on some brand-new aftermarket covers, possibly in chrome.
> ...
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|