Re: [GMCnet] Dash Heat/A/C control unit [message #328445 is a reply to message #328435] |
Sun, 21 January 2018 13:22 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma:
|
Senior Member |
|
|
Until you pull the controller out and inspect, you just guessing as to what
is possibly going on.
All the possibilities have been posted. We stock replacement parts or can
have it repaired so
On Sun, Jan 21, 2018 at 7:47 AM Terry wrote:
> Or the molded cable end eye that anchors the cable sheath to the control
> broke and now the entire cable is moving instead of just the core. You will
> have to see where it is bent the tightest and relieve that stress, repair
> the cable end with a P type cable clamp, and attempt to lube the cable with
> some silicone or other plastic-friendly lubricant. Or get a new/another
> cable and install it with minimum bending to make the action easier on the
> AC
> control assembly.
> --
> Terry Kelpien
>
> ASE Master Technician
>
> 73 Glacier 260
>
> Smithfield, Va.
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|