GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Re: [GMCnet] EFI vs Carb
Re: [GMCnet] EFI vs Carb [message #326607 is a reply to message #326514] Fri, 01 December 2017 17:22 Go to previous messageGo to previous message
Matt Colie is currently offline  Matt Colie   United States
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma:
Senior Member
USAussie wrote on Wed, 29 November 2017 23:29
Wally,

I want to use Poly Armour and put it on the outside of the frame because I'm hoping to plumb the water that condenses on the A/C
evaporator to the fuel line and the latent heat of vaporization will cool the fuel.

Regards,
Rob M.

Rob,

In April of 2012, I replaced just about all the rubber fuel line with Ployarmor. I used a jewelers saw (very fine hacksaw) to cut the bubble off the fittings on the tank access and then used brass compression fittings to make the connection. That makes 5 years and about 40K miles that they have been good. I cheated, I copied what Emery did.

Matt



Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Happy Birthday -Matt Colie
Next Topic: Daytona International Speedway
Goto Forum:
  


Current Time: Mon Jun 17 05:41:53 CDT 2024

Total time taken to generate the page: 0.03971 seconds