GMCforum: GMCnet » Colorado timing chain

Home » Public Forums » GMCnet » Colorado timing chain

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Colorado timing chain [message #320749 is a reply to message #320748]

Thu, 20 July 2017 23:45

roy1

Messages: 2126
Registered: July 2004
Location: Minden nevada

Karma:

Senior Member

I have replaced mine with the radiator in place it is tight but there is enough room. I would use a cloyes true roller chain if you don't want to chance the chain stretching it's worth the extra money. Don't forget to replace the crankshaft seal while you have it out. Don't let your mechanic support the engine by jacking it up on the oil pan sump or it could push the pan up against the oil pump pickup.

Roy Keen Minden,NV 76 X Glenbrook

Report message to a moderator

[Message index]

		Colorado timing chain By: thorndike on Wed, 19 July 2017 20:31
		Re: [GMCnet] Colorado timing chain By: Ken Henderson on Wed, 19 July 2017 21:31
		Re: [GMCnet] Colorado timing chain By: Bullitthead on Wed, 19 July 2017 23:00
		Re: [GMCnet] Colorado timing chain By: thorndike on Thu, 20 July 2017 22:42
		Re: [GMCnet] Colorado timing chain By: Ken Burton on Thu, 20 July 2017 23:04
		Re: [GMCnet] Colorado timing chain By: thorndike on Thu, 20 July 2017 23:26
		Re: [GMCnet] Colorado timing chain By: roy1 on Thu, 20 July 2017 23:45
		Re: [GMCnet] Colorado timing chain By: thorndike on Thu, 20 July 2017 23:49
		Re: [GMCnet] Colorado timing chain By: Bullitthead on Fri, 21 July 2017 00:07
		Re: [GMCnet] Colorado timing chain By: Billy Massey on Fri, 21 July 2017 08:44

Previous Topic:	Need a right rear window...
Next Topic:	[GMCnet] NEW LISTING \| 1976 Birchaven (rear bath) GMC Motorhome

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 27 09:36:54 CDT 2024

Total time taken to generate the page: 0.00818 seconds