GMCforum: GMCnet » Colorado timing chain

Home » Public Forums » GMCnet » Colorado timing chain

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Colorado timing chain [message #320747 is a reply to message #320745]

Thu, 20 July 2017 23:04

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma:

Senior Member

Toronado hoses will NOT fit. Belts maybe. Look in the GMCMI parts interchange for the appropriate numbers. Be sure to get 7/16" (11mm.) wide belts. Do not trust the package. Try to put a 10 mm. wide open end wrench across the belt. It the belt goes in the 10 mm. wrench, IT IS THE WRONG WIDTH BELT.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

[Message index]

		Colorado timing chain By: thorndike on Wed, 19 July 2017 20:31
		Re: [GMCnet] Colorado timing chain By: Ken Henderson on Wed, 19 July 2017 21:31
		Re: [GMCnet] Colorado timing chain By: Bullitthead on Wed, 19 July 2017 23:00
		Re: [GMCnet] Colorado timing chain By: thorndike on Thu, 20 July 2017 22:42
		Re: [GMCnet] Colorado timing chain By: Ken Burton on Thu, 20 July 2017 23:04
		Re: [GMCnet] Colorado timing chain By: thorndike on Thu, 20 July 2017 23:26
		Re: [GMCnet] Colorado timing chain By: roy1 on Thu, 20 July 2017 23:45
		Re: [GMCnet] Colorado timing chain By: thorndike on Thu, 20 July 2017 23:49
		Re: [GMCnet] Colorado timing chain By: Bullitthead on Fri, 21 July 2017 00:07
		Re: [GMCnet] Colorado timing chain By: Billy Massey on Fri, 21 July 2017 08:44

Previous Topic:	Need a right rear window...
Next Topic:	[GMCnet] NEW LISTING \| 1976 Birchaven (rear bath) GMC Motorhome

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 27 09:23:04 CDT 2024

Total time taken to generate the page: 0.01055 seconds