GMCforum: GMCnet » NAPA SKF-21771 rear bearing seal fails the 0.25" test

Home » Public Forums » GMCnet » NAPA SKF-21771 rear bearing seal fails the 0.25" test

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test [message #318221 is a reply to message #318159]

Tue, 30 May 2017 09:22

Jp Benson

Messages: 649
Registered: October 2011
Location: Fla

Karma:

Senior Member

Ken Henderson wrote on Mon, 29 May 2017 16:36

Could it be that the problems with at least some of the
out-of-tolerance seals are really caused by incorrect installation?

I don't recall the brand but none of my seals passed the 1/4" test. So after seating the inner seals I probed with a flat blade screwdriver to check if they were in contact with the bearings. They weren't and so far no problems.

JP

Report message to a moderator

[Message index]

		NAPA SKF-21771 rear bearing seal fails the 0.25" test By: RF_Burns on Mon, 29 May 2017 11:52
		Re: NAPA SKF-21771 rear bearing seal fails the 0.25" test By: A Hamilto on Mon, 29 May 2017 12:04
		Re: NAPA SKF-21771 rear bearing seal fails the 0.25" test By: RF_Burns on Mon, 29 May 2017 12:12
		Re: NAPA SKF-21771 rear bearing seal fails the 0.25" test By: thesmith on Mon, 29 May 2017 14:56
		Re: NAPA SKF-21771 rear bearing seal fails the 0.25" test By: RF_Burns on Mon, 29 May 2017 15:09
		Re: NAPA SKF-21771 rear bearing seal fails the 0.25" test By: ree_eric on Mon, 29 May 2017 17:35
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: Ken Henderson on Mon, 29 May 2017 16:36
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: James Hupy on Mon, 29 May 2017 16:51
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: Ken Henderson on Mon, 29 May 2017 21:47
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: richshoop on Mon, 29 May 2017 22:14
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: Richard RV on Fri, 20 April 2018 15:20
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: James Hupy on Fri, 20 April 2018 19:06
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: Jp Benson on Tue, 30 May 2017 09:22
		Re: NAPA SKF-21771 rear bearing seal fails the 0.25" test By: JohnL455 on Tue, 30 May 2017 08:19
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: Ken Henderson on Tue, 30 May 2017 08:37
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: Richard RV on Thu, 19 April 2018 23:19
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: Ken Henderson on Fri, 20 April 2018 08:32
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: powwerjon on Fri, 20 April 2018 10:49
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: USAussie on Fri, 20 April 2018 10:53
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: Mr ERFisher on Fri, 20 April 2018 13:39
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: Richard RV on Fri, 20 April 2018 14:39
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: Ken Burton on Fri, 20 April 2018 20:10
		Re: NAPA SKF-21771 rear bearing seal fails the 0.25" test By: RF_Burns on Fri, 20 April 2018 07:15
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: USAussie on Fri, 20 April 2018 09:10
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: Richard RV on Fri, 20 April 2018 14:48
		Re: [GMCnet] NAPA SKF-21771 rear bearing seal fails the 0.25" test By: USAussie on Sat, 21 April 2018 12:27
		Re: NAPA SKF-21771 rear bearing seal fails the 0.25" test By: jhbridges on Fri, 20 April 2018 07:44

Previous Topic:	An interesting point of view from Chuck Woodbury
Next Topic:	WANTED : 2 good GMC Hubs for rear wheels

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Jul 02 12:52:39 CDT 2024

Total time taken to generate the page: 0.01028 seconds