GMCforum: GMCnet » [GMCnet] valve cover leaks, cleaning engine

Home » Public Forums » GMCnet » [GMCnet] valve cover leaks, cleaning engine

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] valve cover leaks, cleaning engine [message #317734 is a reply to message #317721]

Thu, 18 May 2017 09:45

Carl S.

Messages: 4186
Registered: January 2009
Location: Tucson, AZ.

Karma:

Senior Member

I'm with Bruce on this. Check and thoroughly dry the inside of your distributor cap. You can spray some ignition spray into it as well, STP makes one, or even a light coating of WD-40 will work. Make sure you did not dislodge ant of the plug wires while washing/scrubbing/drying as well.

Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member

Report message to a moderator

[Message index]

		[GMCnet] valve cover leaks, cleaning engine By: Ek_Lektro on Tue, 16 May 2017 20:06
		Re: [GMCnet] valve cover leaks, cleaning engine By: Bruce Hart on Wed, 17 May 2017 20:55
		Re: [GMCnet] valve cover leaks, cleaning engine By: Carl S. on Thu, 18 May 2017 09:45
		Re: [GMCnet] valve cover leaks, cleaning engine By: James Hupy on Thu, 18 May 2017 09:59
		Re: [GMCnet] valve cover leaks, cleaning engine By: Ek_Lektro on Fri, 19 May 2017 04:56
		Re: [GMCnet] valve cover leaks, cleaning engine By: Bruce Hart on Fri, 19 May 2017 05:45

Previous Topic:	How to disconnect my Norcold refrigerator from A/C 120v
Next Topic:	[GMCnet] NEW LISTING! \| 1978 CUSTOM 26'

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Sep 29 18:43:49 CDT 2024

Total time taken to generate the page: 0.00833 seconds