GMCforum: GMCnet » Sealing the drip rail using foil-backed butyl tape

Home » Public Forums » GMCnet » Sealing the drip rail using foil-backed butyl tape

Show: Today's Messages :: Polls :: Message Navigator

Re: Sealing the drip rail using foil-backed butyl tape [message #316791 is a reply to message #316774]

Sat, 29 April 2017 13:06

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

Johnny,
That has to be lowest application temperature. They have an "extreme weather" version too which is 35*F. They are in Indiana by the looks of it, so they should know cold temps too.

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

		Sealing the drip rail using foil-backed butyl tape By: RF_Burns on Sat, 29 April 2017 09:19
		Re: Sealing the drip rail using foil-backed butyl tape By: jhbridges on Sat, 29 April 2017 10:34
		Re: Sealing the drip rail using foil-backed butyl tape By: RF_Burns on Sat, 29 April 2017 13:06
		Re: Sealing the drip rail using foil-backed butyl tape By: jhbridges on Sat, 29 April 2017 13:51

Previous Topic:	Speedometer Gear Combinations
Next Topic:	GMC Registery

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Jun 23 14:44:27 CDT 2024

Total time taken to generate the page: 0.00496 seconds