GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » 120Vac Wiring from Onan to Coach, 75' Avion w/ 6k Powerdrawer (Does the LII connect to the chassis?)
Re: [GMCnet] 120Vac Wiring from Onan to Coach, 75' Avion w/ 6k Powerdrawer [message #316580 is a reply to message #316578] Mon, 24 April 2017 21:38 Go to previous messageGo to previous message
k2gkk is currently offline  k2gkk   United States
Messages: 4452
Registered: November 2009
Karma:
Senior Member
Please note that I stated that the color codes apply to the POWER CABLE that plugs into the socket!

There is supposed to be a dead short between the L1 and L2 connections on the socket. When the Onan is running, 120 Volts should be on both HOT pins of the socket when measured to the neutral pin. If you don't have that, get an qualified electrician to set it up before you hurt yourself!


Mac in OKC


________________________________
From: Gmclist on behalf of A.
Sent: Monday, April 24, 2017 21:21
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] 120Vac Wiring from Onan to Coach, 75' Avion w/ 6k Powerdrawer

k2gkk wrote on Mon, 24 April 2017 20:38
> If I'm not mistaken, with the 6 kW Onan power drawer, a single 120 Volt AC output is fed to BOTH the L1 and L2 terminals on the female power
> socket into which you plug the four-conductor power cable. The L1 and L2 wires of the power cable each feed separate circuit breakers to power 120
> Volt circuits in the coach. This arrangement allows you to connect to 50 Amp 240 Volt power pedestals in a campground or a dedicated power 50A/240V
> circuit at your home! Once again, if memory is working, L1 and L2 wires in the CABLE are Black and Red. The neutral is White, and the safety
> ground is Green. That should be standard in a GMC coach, but there's no telling what aftermarket finishers did with a Transmode rolling chassis and
> shell.
>
>
> ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> ~~ ~ D C "Mac" Macdonald ~ ~~
> ~ ~ Amateur Radio - K2GKK ~ ~
> ~ ~ Since 30 November '53 ~ ~
> ~ ~ USAF and FAA, Retired ~ ~
> ~ Member GMCMI and Classics ~
> ~ ~ ~ Oklahoma City, OK ~ ~ ~
> ~~ ~ ~ "The Money Pit" ~ ~ ~~
> ~ ~ ~ ~ TZE166V101966 ~ ~ ~ ~
> ~ ~ ~ '76 ex-Palm Beach ~ ~ ~
> ~~ k2gkk + hotmail dot com ~~
> ~ www.gmcmhphotos.com/okclb ~
> ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> ______________
> |[ ]~~~[][ ][]\
> "--OO--[]---O-"
The first half of what you said is correct.

I don't know what was done on all model years, or what Onan did from one year to the next. But my Onan has no color code coming out of the generator
section. Mine has two WHITE wires coming from somewhere that are connected together at that "somewhere" and another WHITE larger gauge coming from
somewhere else. Some drawings seem to show the two wires as L1 and the single as L2, other drawings show the single wire as L1 and the two wires as
L2. Mine has the two wires connected together again to one, and the single split to two (?).

There is no black and red and white and green coming off the Onan itself. Those colors come out of the splice box in the generator compartment (or
wherever it is). Those colored wires go to the 50A Onan receptacle or whatever changeover rigging is installed to go from shore to generator and vice
versa.

I ohmed out the white wires coming from the Onan, and the one(s) that are a dead short to the Onan case got connected to BOTH the green wire and the
white wire in the splice box. Whatever was left (probably comes from the circuit breaker) got connected to BOTH the black wire and the red wire. Those
wires go from the splice box to the 50A Onan outlet in the electrical/city water compartment. The 50A receptacle is wired like you would expect, a
black to one hot, a red to the other, the white to neutral and green to ground.

That is electrically equivalent to the setup where the output of the splice box through the flexible conduit is one no. 6 white wire to the ground AND
JUMPERED TO THE neutral wire (or vice versa) on the 50A outlet and one no. 6 black wire that goes to one of the hot connections and is jumpered to the
other hot on the 50A receptacle.

Others have different setups for switching between shore power and Onan, but I am thinking the Onans are the same from 1973 to 1978.
--
73 23' Sequoia 4 Sale
73 23' CanyonLands Parts Unit 4 Sale
Upper Alabama
"Every day I become more convinced that I am the only person left on the planet that recognizes nonsense for what it is."

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Gmclist Info Page - GMCnet
list.gmcnet.org
To see the collection of prior postings to the list, visit the Gmclist Archives. Using Gmclist: To post a message to all the list members, send email ...



_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Second Oil Pressure Sender
Next Topic: 78 GMC
Goto Forum:
  


Current Time: Fri Sep 27 15:27:31 CDT 2024

Total time taken to generate the page: 0.04654 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software