GMCforum: GMCnet » How Do I Repair Ladder Screw Holes in Back Panel?

Home » Public Forums » GMCnet » How Do I Repair Ladder Screw Holes in Back Panel?

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] How Do I Repair Ladder Screw Holes in Back Panel? [message #315978 is a reply to message #315976]

Thu, 13 April 2017 12:40

Emery Stora

Messages: 959
Registered: January 2011

Karma:

Senior Member

Or you can use well nuts as shown here.
https://www.amazon.com/s/?ie=UTF8&keywords=rubber+well+nuts&tag=googhydr-20&index=aps&hvadid=174242859760&hvpos=1t2&hvnetw=g&a mp;hvrand=9807577609909900246&hvpone=&hvptwo=&hvqmt=e&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9028880&hvtargid=aud-262039 897656:kwd-8244110557&ref=pd_sl_563vqj9fro_e

They work well and are self sealing. I have them holding the top of my ladder.
You will have to open the holes to 1/2” for the large screw/bolt that you will be using. They are very strong.

Emery Stora
77 Kingsley
Frederick, CO

> On Apr 13, 2017, at 10:48 AM, Adrien Genesoto wrote:
>
> Bryan, I used "Rivet Nuts for Plastic and Composites" from McMaster-Carr.
>
> https://www.mcmaster.com/#rivets/=176j0fo
>
> Use some epoxy to seal the head of the RN, and if the latter has a misalignment making the leg not sit right,
> then bend or shim so as to not have any pull out force on the RN.
>
> What I did.
>
>
> --
> ”When we avoid the mistakes we might have made, we sometimes make the mistakes that we might have avoided.”
>
>
>
> Adrien & Jenny Genesoto
> 75 Glenbrook 26-3
> Yuba City,Ca. Text 530-nine-3-three-3-nine-nine-6
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		How Do I Repair Ladder Screw Holes in Back Panel? By: bryhart on Thu, 13 April 2017 01:05
		Re: [GMCnet] How Do I Repair Ladder Screw Holes in Back Panel? By: Jerry Wheeler on Thu, 13 April 2017 06:34
		Re: [GMCnet] How Do I Repair Ladder Screw Holes in Back Panel? By: Mr ERFisher on Thu, 13 April 2017 07:22
		Re: [GMCnet] How Do I Repair Ladder Screw Holes in Back Panel? By: Mr ERFisher on Thu, 13 April 2017 07:24
		Re: How Do I Repair Ladder Screw Holes in Back Panel? By: Larry on Thu, 13 April 2017 08:05
		Re: How Do I Repair Ladder Screw Holes in Back Panel? By: midlf on Thu, 13 April 2017 09:03
		Re: How Do I Repair Ladder Screw Holes in Back Panel? By: Larry on Thu, 13 April 2017 10:19
		Re: How Do I Repair Ladder Screw Holes in Back Panel? By: bhayes on Fri, 21 April 2017 14:21
		Re: How Do I Repair Ladder Screw Holes in Back Panel? By: lqqkatjon on Fri, 21 April 2017 14:48
		Re: How Do I Repair Ladder Screw Holes in Back Panel? By: Jim Wagner on Thu, 13 April 2017 08:38
		Re: How Do I Repair Ladder Screw Holes in Back Panel? By: Adrien G. on Thu, 13 April 2017 11:48
		Re: [GMCnet] How Do I Repair Ladder Screw Holes in Back Panel? By: Emery Stora on Thu, 13 April 2017 12:40
		Re: How Do I Repair Ladder Screw Holes in Back Panel? By: John Biwersi on Thu, 13 April 2017 14:05
		Re: How Do I Repair Ladder Screw Holes in Back Panel? By: bryhart on Fri, 14 April 2017 14:55
		Re: How Do I Repair Ladder Screw Holes in Back Panel? By: pjburt on Fri, 14 April 2017 17:46
		Re: How Do I Repair Ladder Screw Holes in Back Panel? By: bryhart on Fri, 14 April 2017 23:49
		Re: How Do I Repair Ladder Screw Holes in Back Panel? By: midlf on Sat, 15 April 2017 13:07
		Re: How Do I Repair Ladder Screw Holes in Back Panel? By: jhbridges on Tue, 18 April 2017 08:01
		Re: How Do I Repair Ladder Screw Holes in Back Panel? By: midlf on Tue, 18 April 2017 10:14
		Re: How Do I Repair Ladder Screw Holes in Back Panel? By: bryhart on Tue, 18 April 2017 17:11

Previous Topic:	[GMCnet] 31 (yes its GMC related)
Next Topic:	[GMCnet] In tank fuel pumps, or external pumps.

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 27 11:32:56 CDT 2024

Total time taken to generate the page: 0.00744 seconds