GMCforum: GMCnet » Remflex gaskets

Home » Public Forums » GMCnet » Remflex gaskets

Show: Today's Messages :: Polls :: Message Navigator

Re: Remflex gaskets [message #310496 is a reply to message #310488]

Thu, 17 November 2016 17:11

tphipps

Messages: 3005
Registered: August 2004
Location: Spanish Fort, AL

Karma:

Senior Member

The comment on not tightening the center bolt refers to the OEM iron manifold. You can pull the top of the manifold towards the head and an exhaust leak can develop along the bottom edge of the manifold. You need the even pressure on the four center bolts to clamp the gasket correctly.
Reflex is your friend, done properly.
Tom, MS II

2012 Phoenix Cruiser model 2552 KA4CSG

Report message to a moderator

[Message index]

		Remflex gaskets By: Chris Tyler on Thu, 17 November 2016 14:48
		Re: [GMCnet] Remflex gaskets By: Dolph Santorine on Thu, 17 November 2016 15:18
		Re: Remflex gaskets By: Matt Colie on Thu, 17 November 2016 16:13
		Re: Remflex gaskets By: tphipps on Thu, 17 November 2016 17:11
		Re: Remflex gaskets By: jhbridges on Thu, 17 November 2016 17:11
		Re: [GMCnet] Remflex gaskets By: Richard Denney on Thu, 17 November 2016 19:17
		Re: [GMCnet] Remflex gaskets By: jimk on Fri, 18 November 2016 11:51
		Re: [GMCnet] Remflex gaskets By: Ray Erspamer on Sun, 20 November 2016 07:54

Previous Topic:	TV sighting
Next Topic:	Electrical demands?

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Jul 07 19:12:45 CDT 2024

Total time taken to generate the page: 0.00755 seconds