Atom Ant wrote on Wed, 09 November 2016 12:54

Thanks Johnny! I'm in the process of gathering supplies for the re wire.
I do have a question though....

I'm the schematics, there are wires that come off in some instances that show an arrow and a single non boxed letter. Not the boxed double letters designated in the key.

For example, there is a 12 ga red wire coming off the 10 ga red wire going to the isolator from the generator.
This wire goes to X.

There is also a 16 ga org dbl blk wire coming off the front switch, going to R.

What am I missing?

On the schematic for mine, there is an arrow pointing down to an X and lower down the drawing there is an arrow pointing up to an X. I am sure that just means they didn't clutter up the drawing with a line all the way from one to the other.

If yours doesn't have another X or another R, your drawing must be incomplete.

And the other X is the power wire for the dash heat/AC blower high speed.