GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Missing Exhaust Manifold bolt
Re: [GMCnet] Missing Exhaust Manifold bolt [message #308556 is a reply to message #308553] Tue, 11 October 2016 08:07 Go to previous messageGo to previous message
tphipps is currently offline  tphipps   United States
Messages: 3005
Registered: August 2004
Location: Spanish Fort, AL
Karma:
Senior Member
The center bolt acts as a hanger to allow you to manage the exhaust manifold, exhaust gasket, and the bolts without dropping everything. From the description of your leak, sounds like the center bolt was tightened and pulled the manifold towards the top, allowing the gasket to shift. Broken center bolt sounds like P.O. over compensated for the leak by continuing to tighten the bolt and eventually snapping it.
Use anti-size on the bolts. You can attempt to remove the broken bolt, but I might not worry too much about it.
Use the RemFlex gasket from JmK and you will be happy and quiet.
Tom, MS II


2012 Phoenix Cruiser model 2552 KA4CSG
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] 12 Volt Refrigerator
Next Topic: [GMCnet] Things I should not have said in Mansfield
Goto Forum:
  


Current Time: Fri Sep 27 14:18:07 CDT 2024

Total time taken to generate the page: 0.00785 seconds