GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] ride height adjustment
Re: [GMCnet] ride height adjustment [message #30632 is a reply to message #30609] Tue, 16 December 2008 19:59 Go to previous messageGo to previous message
Keith V is currently offline  Keith V   United States
Messages: 2337
Registered: March 2008
Location: Mounds View,MN
Karma:
Senior Member
It looks like I need to get a copy of the repair manual.
I keep hearing about it..

GMCWiperMan wrote on Tue, 16 December 2008 18:14

Keith,

A torsion bar unloader is definitely a mandatory tool for adjusting
them. It's basically a big grade 8+ U-bolt with a positioning nipple in
the base of the U. That nipple fits into a hole on the top of the
crossmember supporting the rear end of the torsion bar. A hefty
crossbar across the free ends of the U carries a 5/8"-3/4" grade 8
forcing screw. The rounded end of that forcing screw fits into a dimple
in the "pork chop" which anchors the rear end of the torsion bar.
Tightening the forcing screw releases the load on the 9/16" cap screw
which determines the angular position of the pork chop. Turning that
adjusting screw without releasing the load on it is a sure way to strip it.

The full procedure for adjusting the torsion bars is adequately covered
in the manual, though the explanation in Claude Brousson's paper is more
complete and readable, IMHO.

Ken Henderson
Americus, GA
www.gmcwipersetc.com
'76 X-Birchaven







Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Major Typo's (or CRS in action)
Next Topic: Finding your GMC with Google Earth Street view
Goto Forum:
  


Current Time: Fri Jul 05 09:57:24 CDT 2024

Total time taken to generate the page: 0.00653 seconds