GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » New Seats...
Re: New Seats... [message #306056 is a reply to message #306050] Sat, 27 August 2016 20:34 Go to previous messageGo to previous message
pjburt is currently offline  pjburt   United States
Messages: 436
Registered: February 2016
Location: Fresno, California
Karma:
Senior Member
quadracerx1 wrote on Sat, 27 August 2016 14:26
After closer inspection, I think I will forgo the electric adjustments and use a manual slider...

One stupid question, I'm using the factory seat mount bases. Does the "access door" face the dash or face the rear of the coach? Not sure mine were installed correctly by the previous owner, so I'm trying to verify...

Thanks for all the help...

Steve


My driver's "access door" faced back and the passenger door faced forward (dinette seat back would block the access if it faced back). My bases were also tapered so the driver's seat moved up as it was moved back and the passenger seat moved down as it moved back. I did away with those bases and have pedestals now. The seats set lower and both now revolve.
Sooo... I can't be a lot of help. I do know when my driver's seat was all the way back, I felt I had to keep ducking my head like in my old chop-top coupe.

Jerry Burt Fresno, CA.
73 Gmc 26' Canyon Lands
Members: FMCA - GMCMI - GMCWS
A truly happy person is one who can enjoy the scenery on a detour.

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Windshields at Mansfield GMCMI rally
Next Topic: AR-AFFF
Goto Forum:
  


Current Time: Wed Jun 26 06:09:20 CDT 2024

Total time taken to generate the page: 0.03354 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software