GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Quest to PEX / standard NPT
Re: [GMCnet] Quest to PEX / standard NPT [message #301754 is a reply to message #301749] Mon, 06 June 2016 22:34 Go to previous messageGo to previous message
Dolph Santorine is currently offline  Dolph Santorine   United States
Messages: 1236
Registered: April 2011
Location: Wheeling, WV
Karma:
Senior Member
Lowes has a barbed fittings that will do what you need. It's in their brass section in plumbing.

I use PEX stainless crimps to button it up.

Dolph Santorine

DE N8JPC

Wheeling, West Virginia

1977 ex-Palm Beach TZE167V100820
1-ton, Sullybuilt Bags, Reaction Arms, 3.70 LSD, Manny Transmission, EV-6010,


> On Jun 6, 2016, at 11:11 PM, mark grady wrote:
>
> In my renovation, I have removed several Quest fittings, elbows valves and
> other do-dads from the galley sink supply lines installed by the PO. I
> think there was one of everything from the Quest catalog. I'm back to
> 'good' Quest behind the drawers ('78 Kingsley, driver side galley.)
>
> I know that Quest Poly-B is a unique size, and found a Sharkbite fitting (
> U4008LF
> ),
> which I consider to be the easy way out. Home Depot
>
> has them for $9 at some stores.
>
> I was trying to find a Poly-B to 1/2" NPT male, and then get longer tails
> for my single hole faucet. This would be only one set of fittings.
>
> Since I can't find that type of fitting, the one above would let me build
> out to short 1/2" PEX extensions, then crimp on 1/2" M-NPT fitting (or
> double down with two more Sharkbites) and connect the faucet tails.
>
> I'm asking here for the wisdom of the great GMC networked mind to see what
> others have done. The rest of the Quest seems to be in good shape, so I'm
> not re-piping everything, even though I have removed enough fittings to
> open a hardware store stocked full of obsolete parts.
>
> Mark Grady
>
> 78 Kingsley 'Bucky'
> N-IN
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org


_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Re: [GMCnet] Mystery connector
Next Topic: Anyone going to Branson need a 3.07 FD?
Goto Forum:
  


Current Time: Mon Sep 23 04:49:22 CDT 2024

Total time taken to generate the page: 0.01845 seconds