GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » [GMCnet] Quest to PEX / standard NPT
Re: [GMCnet] Quest to PEX / standard NPT [message #301751 is a reply to message #301749] Mon, 06 June 2016 22:29 Go to previous messageGo to previous message
A Hamilto is currently offline  A Hamilto   United States
Messages: 4508
Registered: April 2011
Karma:
Senior Member
mark grady wrote on Mon, 06 June 2016 22:11
...I was trying to find a Poly-B to 1/2" NPT male
...I can't find that type of fitting, ...would let me build out to short 1/2" PEX extensions, then crimp on 1/2" M-NPT fitting (or
double down with two more Sharkbites) and connect the faucet tails. ...
Sounds complicated. I always have some 1/2" CPVC hanging around. I would get a Sharkbite polybutylene to CPVC connector and a 1/2" male CPVC NPT fitting. Glue the CPVC NPT male fitting to a short stub of CPVC. Stick that in the CPVC end of the PB to CPVC Sharkbite and there's the Poly-B to 1/2" NPT male you need.

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Re: [GMCnet] Mystery connector
Next Topic: Anyone going to Branson need a 3.07 FD?
Goto Forum:
  


Current Time: Mon Sep 23 04:51:04 CDT 2024

Total time taken to generate the page: 0.00662 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software