GMCforum: GMCnet » Bent bogie arm

Home » Public Forums » GMCnet » Bent bogie arm

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Bent bogie arm [message #294797 is a reply to message #294794]

Sun, 31 January 2016 21:25

jimk

Messages: 6734
Registered: July 2006
Location: Belmont, CA

Karma:

Senior Member

JR,
We also utilize that type of tool to bend the arm.
It really helps when with the tension or compression, one takes a heavy
ball peen hammer and beat on the member as the molecules will tend to take
that setting.

On Sun, Jan 31, 2016 at 6:36 PM, John Wright wrote:

> Jim B used used to have a device to bend and straighten the bogy arms. It
> was a 10’ piece of 2” shed. 80 pipe welded to a flange that had the bolt
> pattern of the axle. Would get on the pipe with one or more people and
> rebend the arm carefully. You get enough leverage to get the axle pretty
> close. I had a picture and I think that it was on his old web site too.
>
> J.R. Wright
> GMC GreatLaker
> GMCGL Tech Editor
> GMC Eastern States Charter Member
> GMCMI
> 78 Buskirk 30' Stretch
> 1975 Avion (Under Reconstruction)
> Michigan, On Location in Tucson
>
>> On Jan 31, 2016, at 6:54 PM, John R. Lebetski
> wrote:
>>
>> Camber should not cause fast wear, just where it wears on the contact
> patch. It still must be toe.
>> --
>> John Lebetski
>> Woodstock, IL
>> 77 Eleganza II
>> Source America First
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502

Report message to a moderator

[Message index]

		Bent bogie arm By: 77PBFinland on Thu, 27 March 2014 16:33
		Re: Bent bogie arm By: appie on Thu, 27 March 2014 16:41
		Re: Bent bogie arm By: GMC Cruse on Thu, 27 March 2014 17:04
		Re: Bent bogie arm By: C Boyd on Thu, 27 March 2014 17:14
		Re: Bent bogie arm By: Loffen on Thu, 27 March 2014 18:14
		Re: Bent bogie arm By: Ken Burton on Thu, 27 March 2014 18:38
		Re: [GMCnet] Bent bogie arm By: k2gkk on Fri, 28 March 2014 09:59
		Re: [GMCnet] Bent bogie arm By: Little Yimmy on Fri, 28 March 2014 10:08
		Re: [GMCnet] Bent bogie arm By: james Ernst on Fri, 28 March 2014 10:48
		Re: [GMCnet] Bent bogie arm By: Billy Massey on Thu, 27 March 2014 19:49
		Re: [GMCnet] Bent bogie arm By: USAussie on Thu, 27 March 2014 19:59
		Re: Bent bogie arm By: Bob de Kruyff on Thu, 27 March 2014 19:56
		Re: [GMCnet] Bent bogie arm By: Kingsley Coach on Thu, 27 March 2014 20:21
		Re: [GMCnet] Bent bogie arm By: corleyw on Thu, 27 March 2014 21:24
		Re: [GMCnet] Bent bogie arm By: USAussie on Thu, 27 March 2014 22:35
		Re: [GMCnet] Bent bogie arm By: Bob de Kruyff on Thu, 27 March 2014 22:56
		Re: [GMCnet] Bent bogie arm By: corleyw on Fri, 28 March 2014 11:37
		Re: [GMCnet] Bent bogie arm By: USAussie on Fri, 28 March 2014 17:45
		Re: Bent bogie arm By: kerry pinkerton on Fri, 28 March 2014 07:27
		Re: [GMCnet] Bent bogie arm By: Ken Henderson on Thu, 27 March 2014 22:49
		Re: [GMCnet] Bent bogie arm By: gbarrow2 on Fri, 28 March 2014 11:35
		Re: [GMCnet] Bent bogie arm By: roy1 on Fri, 28 March 2014 11:45
		Re: [GMCnet] Bent bogie arm By: dwayne jacobson[1] on Fri, 28 March 2014 12:04
		Re: [GMCnet] Bent bogie arm By: gbarrow2 on Fri, 28 March 2014 12:08
		Re: [GMCnet] Bent bogie arm By: Mr ERFisher on Fri, 28 March 2014 12:05
		Re: [GMCnet] Bent bogie arm By: Ken Henderson on Fri, 28 March 2014 12:13
		Re: [GMCnet] Bent bogie arm By: A Hamilto on Fri, 28 March 2014 12:27
		Re: [GMCnet] Bent bogie arm By: roy1 on Fri, 28 March 2014 14:48
		Re: [GMCnet] Bent bogie arm By: gbarrow2 on Fri, 28 March 2014 14:29
		Re: [GMCnet] Bent bogie arm By: Ken Burton on Sat, 29 March 2014 00:47
		Re: [GMCnet] Bent bogie arm By: Ken Burton on Sat, 29 March 2014 01:13
		Re: [GMCnet] Bent bogie arm By: gbarrow2 on Sat, 29 March 2014 08:11
		Re: [GMCnet] Bent bogie arm By: John Olson on Sat, 29 March 2014 10:55
		Re: [GMCnet] Bent bogie arm By: A Hamilto on Sat, 29 March 2014 11:29
		Re: [GMCnet] Bent bogie arm By: 77PBFinland on Sun, 31 January 2016 12:20
		Re: [GMCnet] Bent bogie arm By: roy1 on Sun, 31 January 2016 12:32
		Re: [GMCnet] Bent bogie arm By: jimk on Sun, 31 January 2016 18:32
		Re: [GMCnet] Bent bogie arm By: Ken Henderson on Sun, 31 January 2016 19:51
		Re: [GMCnet] Bent bogie arm By: Ken Burton on Sat, 29 March 2014 11:41
		Re: [GMCnet] Bent bogie arm By: James Hupy on Sat, 29 March 2014 11:52
		Re: [GMCnet] Bent bogie arm By: Ken Burton on Sat, 29 March 2014 17:04
		Re: [GMCnet] Bent bogie arm By: James Hupy on Sat, 29 March 2014 18:00
		Re: [GMCnet] Bent bogie arm By: Ken Henderson on Sat, 29 March 2014 18:49
		Re: Bent bogie arm By: 77PBFinland on Fri, 28 March 2014 15:33
		Re: [GMCnet] Bent bogie arm By: USAussie on Fri, 28 March 2014 17:50
		Re: [GMCnet] Bent bogie arm By: corleyw on Fri, 28 March 2014 22:18
		Re: [GMCnet] Bent bogie arm By: Guy Lopes on Sat, 29 March 2014 13:26
		Re: Bent bogie arm By: Loffen on Fri, 28 March 2014 18:23
		Re: Bent bogie arm By: 77PBFinland on Sat, 29 March 2014 12:17
		Re: [GMCnet] Bent bogie arm By: USAussie on Sat, 29 March 2014 19:08
		Re: Bent bogie arm By: Ken Burton on Sat, 29 March 2014 19:42
		Re: [GMCnet] Bent bogie arm By: USAussie on Sat, 29 March 2014 21:31
		Re: [GMCnet] Bent bogie arm By: Ken Burton on Sat, 29 March 2014 22:52
		Re: [GMCnet] Bent bogie arm By: USAussie on Sat, 29 March 2014 23:30
		Re: [GMCnet] Bent bogie arm By: mickeysss on Sat, 29 March 2014 23:57
		Re: [GMCnet] Bent bogie arm By: Ken Burton on Sun, 30 March 2014 00:51
		Re: Bent bogie arm By: 77PBFinland on Sun, 30 March 2014 04:09
		Re: [GMCnet] Bent bogie arm By: Olly Schmidt on Sun, 30 March 2014 04:18
		Re: [GMCnet] Bent bogie arm By: Jerry Wheeler on Sun, 30 March 2014 07:31
		Re: [GMCnet] Bent bogie arm By: Ken Burton on Sun, 30 March 2014 08:43
		Re: Bent bogie arm By: JohnL455 on Sun, 31 January 2016 19:44
		Re: Bent bogie arm By: JohnL455 on Sun, 31 January 2016 19:54
		Re: [GMCnet] Bent bogie arm By: powwerjon on Sun, 31 January 2016 20:36
		Re: [GMCnet] Bent bogie arm By: jimk on Sun, 31 January 2016 21:25

Previous Topic:	replacement of stock interior drawer slides
Next Topic:	Re: [GMCnet] Transmission fluid leaking by the governor.

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Sep 24 14:11:42 CDT 2024

Total time taken to generate the page: 0.00620 seconds