GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Carb / Vacuum issue
Re: Carb / Vacuum issue [message #288585 is a reply to message #288553] Mon, 12 October 2015 16:24 Go to previous messageGo to previous message
JohnL455 is currently offline  JohnL455   United States
Messages: 4447
Registered: October 2006
Location: Woodstock, IL
Karma:
Senior Member
I'm betting a float/needle seat issue. 1) how do you know the spec height number you are using is correct for this application? 2) even if set correctly the needle seat can be slightly bad and cause flooding over. The primary rods properly in or stuck out in enrichment mode should not matter at base idle. Are you sure your float is not gas logged?

John Lebetski
Woodstock, IL
77 Eleganza II
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Black water tank
Next Topic: [GMCnet] What's the light on the roof, at the front.
Goto Forum:
  


Current Time: Tue Jun 18 07:06:49 CDT 2024

Total time taken to generate the page: 0.09025 seconds