GMCforum: GMCnet » Any leads on a 78 Royale center kitchen

Home » Public Forums » GMCnet » Any leads on a 78 Royale center kitchen

Show: Today's Messages :: Polls :: Message Navigator

Re: Any leads on a 78 Royale center kitchen [message #284686 is a reply to message #284680]

Wed, 12 August 2015 12:03

habbyguy

Messages: 896
Registered: May 2012
Location: Mesa, AZ

Karma:

Senior Member

Smitty52 wrote on Wed, 12 August 2015 09:06

What is below the water fill door? Mine has an electrical outlet with individual caps for each outlet not recessed behind a door.

That's the connection for city water (the fill for the tank is the door above). At least that's my recollection - I never, ever hook up to city water for fear of what happens if I spring a leak.

Mark Hickey Mesa, AZ 1978 Royale Center Kitchen

Report message to a moderator

[Message index]

		Any leads on a 78 Royale center kitchen By: Scott Nutter on Mon, 10 August 2015 18:04
		Re: Any leads on a 78 Royale center kitchen By: habbyguy on Mon, 10 August 2015 21:35
		Re: Any leads on a 78 Royale center kitchen By: Dennis S on Mon, 10 August 2015 21:59
		Re: Any leads on a 78 Royale center kitchen By: A Hamilto on Mon, 10 August 2015 23:44
		Re: Any leads on a 78 Royale center kitchen By: Steve on Tue, 11 August 2015 08:00
		Re: Any leads on a 78 Royale center kitchen By: habbyguy on Tue, 11 August 2015 09:53
		Re: Any leads on a 78 Royale center kitchen By: Smitty52 on Wed, 12 August 2015 11:06
		Re: Any leads on a 78 Royale center kitchen By: habbyguy on Wed, 12 August 2015 12:03
		Re: Any leads on a 78 Royale center kitchen By: Smitty52 on Wed, 12 August 2015 14:00
		Re: Any leads on a 78 Royale center kitchen By: habbyguy on Wed, 12 August 2015 17:08
		Re: Any leads on a 78 Royale center kitchen By: Scott Nutter on Thu, 13 August 2015 21:19
		Re: Any leads on a 78 Royale center kitchen By: John Biwersi on Tue, 11 August 2015 19:14
		Re: Any leads on a 78 Royale center kitchen By: thesmith on Wed, 12 August 2015 08:14

Previous Topic:	Skylight in dry bath?
Next Topic:	[GMCnet] Nuts for the cupboard bolts metal or aluminum?

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Sep 24 13:13:49 CDT 2024

Total time taken to generate the page: 0.00679 seconds