GMCforum: GMCnet » Any leads on a 78 Royale center kitchen

Home » Public Forums » GMCnet » Any leads on a 78 Royale center kitchen

Show: Today's Messages :: Polls :: Message Navigator

Re: Any leads on a 78 Royale center kitchen [message #284606 is a reply to message #284523]

Tue, 11 August 2015 19:14

John Biwersi

Messages: 78
Registered: July 2006
Location: Maplewood,

Karma:

Member

The Coachman center kitchen was only produced with the 1978 model. I have one and I find it is even better than I expected. The kitchen window provides more viewing of the curbside when driving and when you are parked, it is convenient to see what is going on the patio area when one is doing food prep. I'm confident you'll find it was worth the effort to find a Center Kitchen.

Report message to a moderator

[Message index]

		Any leads on a 78 Royale center kitchen By: Scott Nutter on Mon, 10 August 2015 18:04
		Re: Any leads on a 78 Royale center kitchen By: habbyguy on Mon, 10 August 2015 21:35
		Re: Any leads on a 78 Royale center kitchen By: Dennis S on Mon, 10 August 2015 21:59
		Re: Any leads on a 78 Royale center kitchen By: A Hamilto on Mon, 10 August 2015 23:44
		Re: Any leads on a 78 Royale center kitchen By: Steve on Tue, 11 August 2015 08:00
		Re: Any leads on a 78 Royale center kitchen By: habbyguy on Tue, 11 August 2015 09:53
		Re: Any leads on a 78 Royale center kitchen By: Smitty52 on Wed, 12 August 2015 11:06
		Re: Any leads on a 78 Royale center kitchen By: habbyguy on Wed, 12 August 2015 12:03
		Re: Any leads on a 78 Royale center kitchen By: Smitty52 on Wed, 12 August 2015 14:00
		Re: Any leads on a 78 Royale center kitchen By: habbyguy on Wed, 12 August 2015 17:08
		Re: Any leads on a 78 Royale center kitchen By: Scott Nutter on Thu, 13 August 2015 21:19
		Re: Any leads on a 78 Royale center kitchen By: John Biwersi on Tue, 11 August 2015 19:14
		Re: Any leads on a 78 Royale center kitchen By: thesmith on Wed, 12 August 2015 08:14

Previous Topic:	Skylight in dry bath?
Next Topic:	[GMCnet] Nuts for the cupboard bolts metal or aluminum?

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Sep 24 13:49:02 CDT 2024

Total time taken to generate the page: 0.00697 seconds