Re: Switch for norcold eyebrow board [message #283700 is a reply to message #283674] |
Sat, 01 August 2015 22:33 |
bpimm
Messages: 211 Registered: June 2013 Location: Washougal Washington
Karma:
|
Senior Member |
|
|
It has been cleaned several times on the board, Making contact isn't the problem the problem is it doesn't slide and hangs up then twists in the frame bending the frame that keeps it lined up and then it gets worse. I bent the frame back into shape several times but it's getting weaker every time. I will pull the switch and see if it's repairable but I think a replacement would be a longer lived fix. With the board out I can get it to slide supporting the whole length of the slider protrusion but when it's in the refer you can only push on the end of the switch and it rocks thus spreading the frame. This last trip I was able to use one blade of a pair of scissors to push the slider over into the auto position once we got set up and it lasted for the weekend.
Brian & RaeDean
1973 26' #383
Washougal WA
|
|
|