GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Disc brake project still in failure mode
Re: [GMCnet] Disc brake project still in failure mode [message #282486 is a reply to message #282483] Sun, 19 July 2015 15:27 Go to previous messageGo to previous message
Neil Fonville is currently offline  Neil Fonville   
Messages: 68
Registered: May 2014
Karma:
Member
Yes I did swap the lines. Front line on the old moved to Back on new MC.
And vice versa.

What is a Step bore in the MC?

On 7/19/15, 2:54 PM, "Gmclist on behalf of James Hupy"
wrote:

> I am saying that IF you still have the original metal brake lines that
> went
> to the ORIGINAL MASTER CYLINDER, when you install the P-30 master
> cylinder,
> in order to install the lines without adapting anything, the OEM line
> fittings must be swapped in order for them to screw into the P-30. AS THE
> ORIGINAL RESERVOIR IN THE FORWARD MOST POSITION IS FOR THE REAR DRUM
> BRAKES, IF YOU SWITCH THE LINES, THE RESERVOIR THEN BECOMES THE FRONT
> BRAKES. I didn't say that was right or wrong. That is the way I install
> the
> P-30. Haven't had any issues just swapping the lines. When I have to
> replace the lines, as is often the case when you mess with the
> distribution
> valve fittings, I use the same size lines. I personally cannot tell the
> difference either way it is done.
> If you are seeing different pressures at the distribution valve, you
> either have a step bore in the P-30 MC or a restriction somewhere
> downstream from the MC.
> JIM HUPY
> Salem, Or
> 78 GMC ROYALE 403
> On Jul 19, 2015 12:33 PM, "A." wrote:
>
>> Neil Fonville wrote on Sun, 19 July 2015 14:04
>>> I have the P-30 MC and the back port of the MC is the rear brakes and
>> is
>> the larger of the two fluid lines. Do I have that wrong?
>> Mr. Hupy said the larger goes to the rear. JP Winger's gallery on the
>> photo site says the larger goes to the front. Since that is conflicting
>> info,
>> you need to trace the line yourself. If the line with the larger
>> connection on the master cylinder goes to the end of the combination
>> valve
>> that
>> splits to the fronts, it is the line to the front.
>> --
>> '73 23' Sequoia For Sale
>> '73 23' CanyonLands For Sale
>> Upper Alabama
>> On "marriage equality": Once you define the direction that society is
>> headed as "forward", you can call it progress.
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org


_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



1975 GMC II Allen, TX
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Brake Switch Repair
Next Topic: [GMCnet] New GMC
Goto Forum:
  


Current Time: Tue Oct 01 07:54:10 CDT 2024

Total time taken to generate the page: 0.00633 seconds