GMCforum: GMCnet » onan help needed 6000 model

Home » Public Forums » GMCnet » onan help needed 6000 model (want start. will turn over)

Show: Today's Messages :: Polls :: Message Navigator

Re: onan help needed 6000 model [message #282211 is a reply to message #282200]

Wed, 15 July 2015 21:50

JohnL455

Messages: 4447
Registered: October 2006
Location: Woodstock, IL

Karma:

Senior Member

You simply adjust engine speed by the tension of the threaded rod on the governor spring. Board has nothing to do with engine speed or voltage. Most go for about 125-127V no load. This puts you at about 1800 RPM and 60HZ if compounding reactor is ok.

John Lebetski
Woodstock, IL
77 Eleganza II

Report message to a moderator

[Message index]

		onan help needed 6000 model By: chasingsummer on Wed, 15 July 2015 18:33
		Re: onan help needed 6000 model By: RF_Burns on Wed, 15 July 2015 19:44
		Re: onan update By: chasingsummer on Wed, 15 July 2015 19:44
		Re: [GMCnet] onan update By: Mr ERFisher on Thu, 16 July 2015 04:38
		Re: onan help needed 6000 model By: RF_Burns on Wed, 15 July 2015 20:20
		Re: onan help needed 6000 model By: JohnL455 on Wed, 15 July 2015 21:50

Previous Topic:	Zip Dee awning removal
Next Topic:	[GMCnet] Forum Private Messaging Turned OFF

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Oct 02 14:38:55 CDT 2024

Total time taken to generate the page: 0.00544 seconds