GMCforum: GMCnet » onan help needed 6000 model

Home » Public Forums » GMCnet » onan help needed 6000 model (want start. will turn over)

Show: Today's Messages :: Polls :: Message Navigator

Re: onan help needed 6000 model [message #282208 is a reply to message #282200]

Wed, 15 July 2015 20:20

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

Pin 6 supplies power to the remote switch hour meter and running lights. A set of contacts in relay K3 should provide this circuit. You could have an issue with K3 contacts, or the low oil pressure circuit preventing K3 from closing, or the resistor in series with the K3 coil.

The engine speed should be set for the generator line frequency (~60Hz), not to adjust the output voltage.

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

		onan help needed 6000 model By: chasingsummer on Wed, 15 July 2015 18:33
		Re: onan help needed 6000 model By: RF_Burns on Wed, 15 July 2015 19:44
		Re: onan update By: chasingsummer on Wed, 15 July 2015 19:44
		Re: [GMCnet] onan update By: Mr ERFisher on Thu, 16 July 2015 04:38
		Re: onan help needed 6000 model By: RF_Burns on Wed, 15 July 2015 20:20
		Re: onan help needed 6000 model By: JohnL455 on Wed, 15 July 2015 21:50

Previous Topic:	Zip Dee awning removal
Next Topic:	[GMCnet] Forum Private Messaging Turned OFF

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Oct 02 14:40:32 CDT 2024

Total time taken to generate the page: 0.00677 seconds