GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Front seats
Re: [GMCnet] Front seats [message #273928 is a reply to message #273920] Wed, 18 March 2015 06:01 Go to previous messageGo to previous message
Mr ERFisher is currently offline  Mr ERFisher   United States
Messages: 7117
Registered: August 2005
Karma:
Senior Member
Pix would be Good



On Tuesday, March 17, 2015, Terry wrote:

> Jared,
> I had a 2 day backache after fetching the coach from Danville with the
> original factory seats, just like you did. After that, it hurt just to
> drive it
> to work 10 minutes away. The non-adjustable back angle was the real
> problem for me as I had to hold myself forward and the seat cushion had very
> little give to it...horrible seats, guess that's why they lasted so long.
> The upholstery is still in great condition!
> I solved the problem with seats from a Bronco II or an Explorer. Took
> the adjuster tracks off of them and bolted the front right to the rotary
> plates in the GMC. The thinner yet more pliable cushion brought me a
> little closer to the floor and the seatback angle could be adjusted to my
> comfort.
> I think the front holes in the rotary plate lined up with the threaded
> holes in the seat almost perfectly, and I just had to add some short flat
> steel extensions (discarded bed frame rails) to the plate to reach the
> rear holes in the seat because the Bronco seats were longer than the
> originals.
> I used the highback seats, not the low ones from the early Bronco IIs. The
> Explorer seats are all highback, I believe. Then I just added some
> seatcovers from Pep Boys to match the interior of the GMC.
> What a difference...could drive all day now, or at least until
> something breaks :lol:
> --
> Terry Kelpien
> ASE Master Technician
> 73 Glacier 260
> Smithfield, Va.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>


--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] $400 Corian countertop sound about right?
Next Topic: [GMCnet] A Message From Glenn & BJ Herzberger's Daughter about BJ
Goto Forum:
  


Current Time: Thu Jun 20 06:31:45 CDT 2024

Total time taken to generate the page: 0.00839 seconds