GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Dip stick calibration question
Re: [GMCnet] Dip stick calibration question [message #271501 is a reply to message #271405] Mon, 09 February 2015 11:52 Go to previous messageGo to previous message
roy1 is currently offline  roy1   United States
Messages: 2126
Registered: July 2004
Location: Minden nevada
Karma:
Senior Member
Seems like replacing oil shouldn't be that complicated. I have an external oil cooler with about 4ft of 5/8" line tieing it in to the aluminum radiator cil cooler.after an initial oil fill I just drained the oil refilled with 6 quarts and a new filter adjusted the length of the dipstick too read full and I was done. I have about 1000 miles on the oil this trip and the dipstick still reads full. By the way I have 2 drains on my pan. I think I am close enough not to worry.

Roy Keen Minden,NV 76 X Glenbrook
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Birchaven with Honda EU3000is generator installed
Next Topic: [GMCnet] MPG
Goto Forum:
  


Current Time: Fri Jul 05 03:20:35 CDT 2024

Total time taken to generate the page: 0.03183 seconds