GMCforum: GMCnet » [GMCnet] Never assume anything

Home » Public Forums » GMCnet » [GMCnet] Never assume anything

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Never assume anything [message #269969 is a reply to message #269946]

Sun, 18 January 2015 21:18

k2gkk

Messages: 4452
Registered: November 2009

Karma:

Senior Member

I would use the 1/4" blade variety. I think the smaller versions are maybe .193" in size, but I haven't used either in several years.

Another valid option to connect/separate the control board and genset might be the tubular push-on connectors. They are also available in insulated versions and a little good quality electrical tape would serve to protect any part of those connectors that might short circuit out.

Use a good crimping tool to ensure secure electrical AND physical connections.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~~ ~ D C "Mac" Macdonald ~ ~~
~ ~ Amateur Radio - K2GKK ~ ~
~ ~ USAF and FAA, Retired ~ ~
~ ~ ~ Oklahoma City, OK ~ ~ ~
~~ ~ ~ "The Money Pit" ~ ~ ~~
~ ~ ~ ~ TZE166V101966 ~ ~ ~ ~
~ ~ ~ '76 ex-Palm Beach ~ ~ ~
~~ k2gkk + hotmail dot com ~~
~ www.gmcmhphotos.com/okclb ~
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
______________
*[ ]~~~[][ ][|\
*--OO--[]---O-*

> From: robmueller@iinet.net.au
> To: gmclist@temp.gmcnet.org
> Date: Mon, 19 Jan 2015 11:10:49 +1100
> Subject: Re: [GMCnet] Never assume anything
>
> Mac,
>
> McMaster Carr has them.
>
> http://www.mcmaster.com/#7820k11/=vixrep
>
> I'm not sure that's the correct size for the tab or wire.
>
> Regards,
> Rob M.
>
> -----Original Message-----
> From: D C _Mac_ Macdonald
>
> Yes, they are made in 90 degree versions but they MAY be harder to find.
>
> Mac in OKC

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] Never assume anything By: glwgmc on Fri, 16 January 2015 15:14
		Re: [GMCnet] Never assume anything By: Steve on Sat, 17 January 2015 04:34
		Re: [GMCnet] Never assume anything By: k2gkk on Sun, 18 January 2015 11:46
		Re: [GMCnet] Never assume anything By: USAussie on Sun, 18 January 2015 16:58
		Re: [GMCnet] Never assume anything By: k2gkk on Sun, 18 January 2015 17:06
		Re: [GMCnet] Never assume anything By: USAussie on Sun, 18 January 2015 18:10
		Re: [GMCnet] Never assume anything By: k2gkk on Sun, 18 January 2015 21:18
		Re: [GMCnet] Never assume anything By: tphipps on Mon, 19 January 2015 07:54
		Re: [GMCnet] Never assume anything By: Ken Henderson on Mon, 19 January 2015 20:37
		Re: [GMCnet] Never assume anything By: USAussie on Tue, 20 January 2015 01:40
		Re: [GMCnet] Never assume anything By: Steve on Tue, 20 January 2015 03:51
		Re: [GMCnet] Never assume anything By: Ken Burton on Tue, 20 January 2015 04:10
		Re: [GMCnet] Never assume anything By: Mr ERFisher on Tue, 20 January 2015 10:39
		Re: [GMCnet] Never assume anything By: Ken Henderson on Wed, 04 February 2015 04:50
		Re: [GMCnet] Never assume anything By: Nelson on Tue, 20 January 2015 10:05
		Re: [GMCnet] Never assume anything By: jhbridges on Wed, 04 February 2015 17:05

Previous Topic:	GMC icon at the top of forum page
Next Topic:	Re-anchoring seats and the couch

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Jul 08 02:01:09 CDT 2024

Total time taken to generate the page: 0.00719 seconds