GMCforum: GMCnet » [GMCnet] Never assume anything

Home » Public Forums » GMCnet » [GMCnet] Never assume anything

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Never assume anything [message #269926 is a reply to message #269789]

Sun, 18 January 2015 11:46

k2gkk

Messages: 4452
Registered: November 2009

Karma:

Senior Member

I'd suggest using the insulated flat push-on connectors on those pig-tail wires for ease of connect/disconnect of the new board to the coach wiring. Cover the joints with heat shrink for security and safet.

Mac in OKC
"Money Pit"

Sent from my iPad

> On Jan 16, 2015, at 15:14, Work Jerry wrote:
>
> The new board came today. I installed it, pressed the start switch and the Onan sprang to life. As soon as it warmed up a minute or so it ran evenly, put out 125vac with no load and 115VAC under load. So, the combination of the module plus a new board and it sounds better and smoother than it ever has. Good use of $250 or so. The new board with the pig tail soldered on looks like a much higher quality piece that the stock board with all those push on connectors ever did. Thanks to all who offered advice and suggestions. My suggestion is to make sure the polarity on the coil is correct before hooking up the module!
>
> Jerry
> Jerry Work
> The Dovetail Joint
> Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
> Visitors always welcome!
> glwork@mac.com
> http://jerrywork.com
>
>
>
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] Never assume anything By: glwgmc on Fri, 16 January 2015 15:14
		Re: [GMCnet] Never assume anything By: Steve on Sat, 17 January 2015 04:34
		Re: [GMCnet] Never assume anything By: k2gkk on Sun, 18 January 2015 11:46
		Re: [GMCnet] Never assume anything By: USAussie on Sun, 18 January 2015 16:58
		Re: [GMCnet] Never assume anything By: k2gkk on Sun, 18 January 2015 17:06
		Re: [GMCnet] Never assume anything By: USAussie on Sun, 18 January 2015 18:10
		Re: [GMCnet] Never assume anything By: k2gkk on Sun, 18 January 2015 21:18
		Re: [GMCnet] Never assume anything By: tphipps on Mon, 19 January 2015 07:54
		Re: [GMCnet] Never assume anything By: Ken Henderson on Mon, 19 January 2015 20:37
		Re: [GMCnet] Never assume anything By: USAussie on Tue, 20 January 2015 01:40
		Re: [GMCnet] Never assume anything By: Steve on Tue, 20 January 2015 03:51
		Re: [GMCnet] Never assume anything By: Ken Burton on Tue, 20 January 2015 04:10
		Re: [GMCnet] Never assume anything By: Mr ERFisher on Tue, 20 January 2015 10:39
		Re: [GMCnet] Never assume anything By: Ken Henderson on Wed, 04 February 2015 04:50
		Re: [GMCnet] Never assume anything By: Nelson on Tue, 20 January 2015 10:05
		Re: [GMCnet] Never assume anything By: jhbridges on Wed, 04 February 2015 17:05

Previous Topic:	GMC icon at the top of forum page
Next Topic:	Re-anchoring seats and the couch

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Jul 08 00:36:57 CDT 2024

Total time taken to generate the page: 0.00757 seconds