GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Experience w/ CHUCK AULGUR bearing grease tool
Re: [GMCnet] Experience w/ CHUCK AULGUR bearing grease tool [message #268456 is a reply to message #268453] Sun, 28 December 2014 17:17 Go to previous messageGo to previous message
USAussie is currently offline  USAussie   United States
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma:
Senior Member
David,

I had the pleasure of listening to Chuck when he gave a presentation on his greasing tool, IIRC he noted that it would be best to
disassemble the hubs and knuckles to see what their condition was before the tool was used.

When this tool was discussed here on the GMCnet it was noted that the area around the CV joint where attach the tool was very dirty
and you had to be VERY careful not to get any crud in the bearings.

http://www.gmcmhphotos.com/photos/front-wheel-bearing-lubrication-tool/p30579-bearing-lubrication-tool-01.html

http://www.gmcmhphotos.com/photos/front-wheel-bearing-lubrication-tool/p30580-bearing-lubrication-tool-02.html

Regards,
Rob M.
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426

-----Original Message-----
From: David

Hey There GMC'ers anyone here have any knowledge about this tool? It claims to be able to get grease to the front bearings without
disassembling the hub. If it works I am VERY interested... and yes I know dis-assembly and packing would be the best ... but ...

http://www.appliedgmc.com/prod.itml/icOid/885
http://www.appliedgmc.com/prod.itml/icOid/885

'78 Palm Beach

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Facebook
Next Topic: Found the title location of my family's 1975 GMC.... need assistance
Goto Forum:
  


Current Time: Wed Oct 02 14:19:11 CDT 2024

Total time taken to generate the page: 0.02300 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software