GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Modifying Cockpit Step
Re: [GMCnet] Modifying Cockpit Step [message #268413 is a reply to message #268411] Sun, 28 December 2014 06:25 Go to previous messageGo to previous message
Ken Burton is currently offline  Ken Burton   United States
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma:
Senior Member
I once worked on a project in France on an unannounced product. It was about the size of a refrigerator and would sell for $200,000 to $700,000 a copy depending on features installed and country requirements. Multiple "refrigerators" could be attached together for more capacity if necessary. Each position inside the "refrigerator" had two cards (front and back). The front provided the functionality and the rear adapted it for each country's telephony and communication requirements. All of the engineers on the machine resided in the same location but they never talked to each other. When they wnat to be stubborn the would claim to not speak English.

I and 2 others from around the world showed up and we were suppose to put the finished product through it's paces and write implementation manuals. Each card was designed and programmed by a different Engineer. Nothing worked together. We spent the entire 6 months testing applications, looking up individual engineers, explaining problems in English to French engineers, and getting the interoperability problems resolved. We never got a single implementation manual written. Another crew later came in and wrote the manuals. I later returned to "Americanize" their English written manuals.

I learned on a previous similar assignment at a US site that engineers only look at their assigned piece and seldom look at the completed project as a whole. This France assignment was no different. One engineer can design a starter but he is not worried about where the power comes from to run it. That responsibility belongs to someone else.


Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: GMC Logo Light Insert for 2 Inch Receiver
Next Topic: Heater hose tee leaking
Goto Forum:
  


Current Time: Sat Jun 15 22:41:59 CDT 2024

Total time taken to generate the page: 0.00828 seconds