GMCforum: GMCnet » [GMCnet] Modifying Cockpit Step

Home » Public Forums » GMCnet » [GMCnet] Modifying Cockpit Step

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Modifying Cockpit Step [message #268324 is a reply to message #268323]

Fri, 26 December 2014 21:38

Ken Henderson

Messages: 8726
Registered: March 2004
Location: Americus, GA

Karma:

Senior Member

Rob,

If you can find a way to locate the lateral center both inside and
underneath, you can probably measure accurately enough from underneath to
locate 1-1/2" holes sufficiently accurately. Perhaps drill 1/4" first,
then offset from that based, on the bolt's relationship to a probe inserted
from inside.

JWID,

Ken H.

On Fri, Dec 26, 2014 at 10:24 PM, Robert Mueller
wrote:

> Ken,
>
> I suspected what you've noted below; I was looking for the easy way out!
> ;-)
>
> The photo I posted was from Espen so I don't have the plywood removed, I
> will try and remove it and locate the holes over the next
> week or so, right now I'm working on the steering box centering procedure.
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach

Report message to a moderator

[Message index]

		[GMCnet] Modifying Cockpit Step By: Ken Henderson on Fri, 26 December 2014 21:00
		Re: [GMCnet] Modifying Cockpit Step By: USAussie on Fri, 26 December 2014 21:24
		Re: [GMCnet] Modifying Cockpit Step By: Ken Henderson on Fri, 26 December 2014 21:38
		Re: [GMCnet] Modifying Cockpit Step By: kerry pinkerton on Fri, 26 December 2014 22:56
		Re: [GMCnet] Modifying Cockpit Step By: Ken Henderson on Fri, 26 December 2014 23:53
		Re: [GMCnet] Modifying Cockpit Step By: mild bill on Fri, 26 December 2014 23:12
		Re: [GMCnet] Modifying Cockpit Step By: Ken Henderson on Sat, 27 December 2014 00:02
		Re: [GMCnet] Modifying Cockpit Step By: USAussie on Sat, 27 December 2014 06:28
		Re: [GMCnet] Modifying Cockpit Step By: Ray R. on Sat, 27 December 2014 08:00
		Re: [GMCnet] Modifying Cockpit Step By: mike miller on Sat, 27 December 2014 19:49
		Re: [GMCnet] Modifying Cockpit Step By: Ray R. on Sat, 27 December 2014 20:09
		Re: [GMCnet] Modifying Cockpit Step By: mike miller on Sat, 27 December 2014 20:22
		Re: [GMCnet] Modifying Cockpit Step By: Ray R. on Sat, 27 December 2014 20:40
		Re: [GMCnet] Modifying Cockpit Step By: mike miller on Sun, 28 December 2014 00:02
		Re: [GMCnet] Modifying Cockpit Step By: USAussie on Sun, 28 December 2014 00:46
		Re: [GMCnet] Modifying Cockpit Step By: Bruce Hart on Sun, 28 December 2014 02:34
		Re: [GMCnet] Modifying Cockpit Step By: Ken Burton on Sun, 28 December 2014 06:25
		Re: [GMCnet] Modifying Cockpit Step By: USAussie on Sun, 28 December 2014 07:21
		Re: [GMCnet] Modifying Cockpit Step By: Adrien G. on Sat, 27 December 2014 21:10
		Re: [GMCnet] Modifying Cockpit Step By: USAussie on Sat, 27 December 2014 22:52
		[GMCnet] Modifying Cockpit Step By: Mr ERFisher on Sun, 28 December 2014 09:02
		Re: [GMCnet] Modifying Cockpit Step By: Ken Henderson on Sun, 28 December 2014 09:15
		Re: [GMCnet] Modifying Cockpit Step By: kerry pinkerton on Sun, 28 December 2014 09:29
		Re: [GMCnet] Modifying Cockpit Step By: Ken Henderson on Sun, 28 December 2014 09:51
		Re: [GMCnet] Modifying Cockpit Step By: lotsofspareparts on Sat, 27 December 2014 22:00
		Re: [GMCnet] Modifying Cockpit Step By: USAussie on Sat, 27 December 2014 22:48
		Re: [GMCnet] Modifying Cockpit Step By: jhb1 on Sun, 28 December 2014 08:49
		Re: [GMCnet] Modifying Cockpit Step By: jhbridges on Sun, 28 December 2014 19:02
		Re: [GMCnet] Modifying Cockpit Step By: Ray R. on Sun, 28 December 2014 22:43
		Re: [GMCnet] Modifying Cockpit Step By: mild bill on Mon, 29 December 2014 23:01

Previous Topic:	GMC Logo Light Insert for 2 Inch Receiver
Next Topic:	Heater hose tee leaking

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Sep 24 13:55:55 CDT 2024

Total time taken to generate the page: 0.01192 seconds